Go to Options, then the “Fan” tab to activate manual fan control in MSI Afterburner. Follow these steps to create your own fan curve. Using the chart, you can set the fan speed according to the temperature. Note: A fan curve is a chart visualization of fan speed and temperature. This can be really helpful, as you don’t need to tweak multiple fan settings to keep the performance maximum.
Users can set up to 5 profiles of fan speed settings. Along with this, MSI Afterburner is free and works with almost any graphics card, AMD, or Nvidia. Along with controlling fan speed, it can display memory usage, CPU/GPU temperature, FPS (Frames Per Second), GPU voltage, and frequency in real-time. MSI Afterburner is free software that allows you to overclock your computer.
Keeping this in mind, we have listed some of the best fan control software that you can use. However, you can control the rate at which they spin using fan control software.Ī good fan control application makes it easier to tune the CPU and GPU fans for maximum performance with minimum noise. But sometimes, the fans might spin at a high RPM by default, which can cause the system to get noisy. Generally, they spin at different RPMs (Rotation Per Minutes) depending on the load on your system. I hope this cleared up some confusion.The fans inside your computer keep the component and the system cool.
I can even control the colors from my MSI motherboard software. In my case, I had downloaded the wrong version of the driver software. It took me a while to figure it out, but once I had the above setup, the software worked. Each driver version is only looking for the model of cooler it is tailored for, so make sure that in your case, you download and run the WRAITH PRISM software. For instance, you cannot use Wraith Prism software with a Wraith Max cooler. The software you use should match the model of Wraith cooler you have.The cooler can ONLY be connected to a standard USB 2.0 header. FYI, I'm guessing the AMD USB HEADER on your motherboard is proprietary and is not compatible with this cooler.In this state, the software will not be able to communicate with the cooler. If the RGB wire is connected, the controller will default to using the RGB control and USB control will be turned off. For color control, however, ONLY the USB wire should be connected to a USB 2.0 header. Of course, for fan control, the fan header should always be connected to the CPU fan control header on the motherboard.There are two conditions that must be met in order for the Wraith software to work:
0 kommentar(er)
